600A 400A 500Amps Manual Arc Welder Generator Direct Current Diesel Drive Motor Two-station Welding Unit

600A 400A 500Amps manual arc welder generator direct current Diesel drive motor two-station welding unit

The 400Amp diesel welding unit is equipped with industrial heavy duty diesel engine driven welding machines with Strong auxiliary generator .

The diesel weldIing plant adopt advanced inverter soft switch technology, PWM control technology, and negative feedback control technology , enjoys excellent dynamic quality and welding performance within full voltage/current regulation range.

Technical specifications:

Rated welding current, (at Pn-60%), not more than – 400 A;

Rated operating voltage, not less than – 36V;

Welding current regulation limits, not less than – 60A, not more than – 400A;

No–load voltage, not less than – 70V, not more than - 90V;

Fuel tank capacity, not less than – 60L, not more than – 120L;

Pump efficiency, not less than - 70%;

Auxiliary power generator:

Power, not more than - 4 kW;

Rated voltage, (at 50 Hz), no more than – 230V;

Engine:

Engine type- diesel;

Engine power, not less than - 37/50 kW/hp;

Rotation speed, not more than - 1800 rpm;

Engine cooling - liquid/air;

Climatic version - N1;

The trailer-chassis is designed for operation by vehicles having a traction device according to GOST 2349, electrical outlets according to GOST 9200, devices for attaching the safety chains of the trailer, as well as an additional rear and front stop to maintain in a horizontal position.

Additional equipment:
- Ballast rheostat;
- Welding cables, an electrode holder, a welder's shield, a "Vector" type cutter length 510 mm are designed for manual cutting of steels with a thickness from 3 to 300 mm, a gas and oxygen reducer;
- propane and oxygen hoses of 20 m each;
- Complete set of an extended set of tools for maintenance;
- Additional tool box;
- Preheating system for starting the welding unit at ambient temperature below, C0– 25;
- Shelters of the welding site from environmental influences;
- Power tools for machining edges of welded elements and welded joints;
- Light alarm;
- Automatic emergency protection system;
- Built-in auxiliary generator, - 220/380 V, to VA - 4-7, AC (for powering power tools and consumers with an active load - incandescent lamps, heaters, soldering irons);
- A lamp for carrying out work at night;
- Tire pumping device;
- Electric fuel level indicator;
- Hour counter;
- Cables for remote start from an outside source;
- Device for drying electrodes;
- Anti-rollback stops, -2 pcs;
- Socket ONC- VN-1-7/30- P1;
-Spare wheel;

Manual Arc Welder Generator

600A arc welder generator

500Amps arc welder generator

600A 400A 500Amps Manual Arc Welder Generator Direct Current Diesel Drive Motor Two-station Welding Unit Images